The 7015 is a fully integrated pressure test and calibration system. It is suitable for field and laboratory calibration work of both pressure and electrical process loop signals. The instrument has two pressure channels with the ranges specified on ordering. Standard available ranges for each channel are; 0.2, 2, 5, 10, 20, 35, 70, 100, 200, 400, and 600 bar. Vacuum down to -850 mbar is possible on the 2 bar version. Other ranges are available upon request.

For process signal calibration the loop signal is displayed on the LCD display to 0.05% accuracy. Loop drive supply (24V or 36V) is also provided. Both pressure and loop signal can be displayed at the same time to speed up the calibration of pressure transmitters. Additionally a continuity function is available for testing for open circuit loops.

Both pressure and loop current are displayed on separate 4.5 digit LCD displays.

The 7015 allows switch selection of five pressure units. These must be specified on ordering from the following:- bar, PSI, kPa, MPa, inWg, cmWg, inHg, mmHg, Kg/cm2, atm.

For the 7015, input pressure can be generated by external hand pumps, 7090 pneumatic (-950 mbar to 40 bar), or 7095 hydraulic (0 to 700 bar).

The 7015 is housed in an impact resistant safety case that provides protection and increased durability. All pressure connections are on the side of the case.

The instrument is supplied with a pressure hose, electrical test lead, 2 electrical probes and 2 crocodile clips. The other features include: