budenberg thermometers / temperature gauges
What we offer?
Budenberg offers wide range of Bi-metallic thermometers, rigid stem and distance reading capillary type Gas filled thermometers.
These thermometers are available with relay outputs for temperature control.
High accuracy range of Any Angle Thermometers is designed for process, petrochemical and hygienic applications. Standard features include, fast, accurate and repeatable readings, fully adjustable display head, user calibration, all stainless steel construction.
Models are available in two accuracy classes to meet both HVAC and industrial process applications. The lower accuracy 1.5% FSD units are designed to meet the requirements of the HVAC market whereas the 1.0% higher accuracy units are designed for harsher industrial applications such as offshore Oil & Gas.
In addition to the standard ranges and configurations, custom units can be manufactured to meet most requirements. A full range of screwed and flanged Thermowells are available in a wide choice of materials and configurations.
The gauges incorporates a 316 Stainless Steel Case and Bezel and standard feature such as IP66 protection as defined in EN 60529. The gauges have white Anodised Aluminium dials marked in black finish with Stainless steel black coloured pointer.
Specifications
Dial Sizes
100 mm (4″) and 150 mm (6″)
Mounting
Direct mounting whereby the Any Angle head can be rotated through 360° and angled 180° from axis
Scale Ranges (°C or °F)
-40/60°C, 0/60°C, 0/100°C, 0/120°C, 0/150°C, 0/200°C, 0/300°C, 0/400°C, 0/500°C, 0/600°C
Other equivalent units is available with single or dual scale
Accuracy Class
BT6x1 is CL: 1.0 – 1.0% of fsd
BT6x5 is CL: 1.5 – 1.5% of fsd
Stem Diameter
6mm, 8mm, 10mm, 12.7mm diameters in 316L Stainless Steel
Standard Stem Lengths
100mm, 150mm, 225mm, 300mm, 400mm – Minimum insertion length of 55mm
Options: Other lengths available on request
Fitting
Plain stainless steel stem supplied with compression gland ½” BSP or NPT as standard, others available on request
Connections
3/8″, 1/2″ BSP male and 1/2″ NPT male (Other thread sizes and connection types are available)
User Calibration
External zero adjustment from rear as standard
Certification
All thermometers are are individually tested. A certificate of Conformity is supplied free of cost.
Calibration / Test Certificate and material certificate to BS EN10204 3.1B is supplied, if ordered separately.
The technical specification and wide range of standard features make this thermometer the obvious choice for a wide range of process and engineering applications where mercury is not acceptable. Gas Filled Thermometers with rigid stems are suitable for measuring and monitoring temperatures directly from the source of the heat.
Gas Filled Thermometers are often used in Chemical and Allied industries such as Offshore Oil & Gas where the atmosphere is corrosive and severe, due to weather.
The Gas Filled Thermometer is supplied with thermowells and other accessories to meet custom requirements.
Specifications
Size
100mm (4”) & 150mm (6”)
Mounting
Model 32G & P32G Vertical / Bottom Entry
Model 33G & P33G 90° Horizontal / Rear Entry
Model 34G/P34G/54G Horizontal / Rear Entry
Case & Bezel
Model 32G/33G/34G Metal Duotone Grey Finish.
Model P32G/P33G/P34G DMC* in 150 mm only
Model 54G Stainless Steel
* Grey Dough Moulded Compound
Scale Ranges
-60 to 700°C or -76 to 1300°F with a minimum range of 80°C and span of 400°C. Single and dual scales are available
Accuracy Class
CL: 1 1.0% of FSD to BS EN 13190:2001
Bulb Material
316 Stainless Steel
Connection Sizes
¾” BSP standard, ½” or 1” BSP / NPT (others available on request)
Connection Material
316 Stainless Steel
Bulb Diameter
14.3mm and 10.3mm as standard. Other non-standard sizes available as an option
Bulb Length
Varies with temperature range and diameter of dial
Dial
White Anodised Aluminium marked in black finish. Single or dual scale
Pointer
Stainless steel coloured black. Set pointer available as option.
Movement
Brass fitted with oil impregnated sintered bronze bushes. Bi-metallic temperature compensator
Window
3mm Laminated Safety Glass (Standard). Acrylic Plastic Window (Option)
Contacts and Switches (optional)
Up to two independently settable Reed, Magnetic or Mercury switch contacts, each can have a different model of operation
Certification
All Gauges are individually tested. A certificate of Conformity is supplied free of cost.
Calibration / Test Certificate and material certificate to BS EN10204 3.1B is supplied, if ordered separately.
Gas Filled Thermometer Nitrogen in Steel is a distance reading capillary type temperature measurement device. The wide range of standard features make this thermometer the obvious choice for a wide range of process and engineering applications.
Primarily designed for the harshest of environments the model NIS is especially suitable for places where the presence of Mercury is undesirable, such as the Food and Nuclear Industries.
Gas Filled Thermometers are often used in Chemical and Allied Industries such as Offshore Oil & Gas industries where the atmosphere is corrosive, and severe due to weather.
Built to meet EN-837 the NIS is manufactured to compliment the Budenberg ranges of pressure gauges.
Specifications
Size
100mm (4”) & 150mm (6”)
Mounting
Model 95FG & P95FG Surface Mounting
Model 211G & 212G Flush mounting
Case & Bezel
Model 95FG & 211G Duotone Grey metal finish
Model P95FG DMC* in 150mm size only
Model 212G Stainless Steel
* Grey Dough Moulded Compound
Scale Ranges
-60 to 700°C or -76 up to 1300°F with a minimum range of 80°C. Single and dual scales are available
Accuracy Class
CL: 1 1.0% of FSD as defined in EN837-1
Bulb Material
Material: 316 Stainless Steel
Over-temperature
Units can be built to withstand significant over range temperatures on request.
Connection Sizes
¾” BSP standard, ½” or 1” BSP / NPT as an option
Connection Material
316 Stainless Steel
Bulb Diameter
14.3mm or 10.3mm as standard in Stainless Steel
Bulb Length
Varies with temperature range and diameter of dial
Dial
White Anodised Aluminium marked in black finish. Single or dual scale
Pointer
Stainless steel coloured black. Set pointer available as option
Movement
316 Stainless Steel fitted with oil impregnated sintered bronze bushes. Bi-metallic temperature compensator
Window
3mm laminated Safety Glass as Standard. Acrylic Plastic Window as option
Distance Reading options
Capillaries can be supplied in Stainless Steel. PVC or nylon as option
Capillary lengths of up to 45 metres can be specified
Contacts & Switches (Optional)
Up to two independently settable Reed, Magnetic switch contacts, each can have a different model of operation
Certification
All Gauges are individually tested. A certificate of Conformity is supplied free of cost.
Calibration / Test Certificate and material certificate to BS EN10204 3.1B is supplied, if ordered separately.
The technical specification and wide range of standard features make this thermometer the obvious choice for a wide range of process and engineering applications.
Primarily designed for the harshest of environments the models 44FG is especially suitable for places which are subject to high ambient temperatures.
Built to BS EN 13190:2001 this range is manufactured to compliment the Budenberg ranges of pressure gauges. They are supplied with thermowells and other accessories to meet custom requirements.
Specifications
Size
100mm (4”) & 150mm (6”)
Mounting
Direct (Rigid Stem), Surface and Flush (Distance Reading)
Case & Bezel
Vinyl Coated Cast Iron (Weatherproof)
Scale Ranges
-35 to 600°C with a minimum range of 100°C. Single and dual scales are available
Accuracy Class
CL: 1 1.0% of FSD to BS EN 13190:2001
Bulb Material
316 Stainless Steel
Over-temperature
Units can be built to withstand significant over range temperatures on request
Connection Sizes
¾” BSP standard, ½” or 1” BSP/NPT (others available on request)
Connection Material
Nickel Plated Brass, Stainless Steel available as an option
Bulb Diameter
14.3mm as standard, Other non-standard sizes available as an option
Bulb Length
Varies with temperature range and diameter of dial
Dial
White Anodised Aluminium marked in black finish. Single or dual scale
Pointer
Stainless steel coloured black. Set pointer available as option
Movement
Brass fitted with oil impregnated sintered bronze bushes. Bi-metallic temperature compensator
Window
3mm Laminated Safety Glass as Standard. Acrylic Plastic Window as option
Distance Reading options
Capillaries are supplied in stainless steel as standard up to 35 meters. PVC or Nylon reinforced PVC covering is provided as option.
Contacts & Switches (optional)
Up to two independently settable Model 144 Magnetic Assisted switchs
Certification
All Gauges are individually tested. A certificate of Conformity is supplied free of cost.
Calibration / Test Certificate and material certificate to BS EN10204 3.1B is supplied, if ordered separately.
